PLANET WNAP-7206 - Manual (Page 104)

User Manual of WNAP-7206
-96-
recommended enabled.
 Enable Short GI
This function is recommended for it will increase the data
capacity by reducing the guard interval time.
 Enable AP Isolation
Isolate all connected wireless stations so that wireless stations
cannot access each other through WLAN. This function will be
disabled if WDS/Bridge is enabled.
 Save Click the Save button to save the setting.
5.6.5 Antenna Alignment
Choose menu “Wireless > Antenna Alignment”, and then you can know how remote the Device’s signal
strength changes while changing the antenna's direction.
1. This function is not available in AP Router mode, but in both Standard AP
mode and AP Client Router mode.
2. It only works after you have established connection to remote AP in client
mode.
Figure 5-6-5-1 Antenna Alignment
The page includes the following fields:
Object Description
 Remote RSSI Remote AP's signal strength value.
 Signal Percent The ratio of RSSI to RSSI RANGE in percentage.
 RSSI RANGE You can drag the Slider to set or input the RSSI RANGE value.
5.6.6 Distance Setting
Choose menu “Wireless > Distance Settings”, and then you can adjust the wireless range in outdoor
conditions.