PLANET WNAP-7206 - Manual (Page 145)

User Manual of WNAP-7206
-137-
5.16.3 Ping Watch Dog
Selecting “System Tools > Ping Watch Dog” allows you to continuously monitor the particular connection
between the device and a remote host. It makes this device continuously ping a user defined IP address (it can
be the Internet gateway for example.). If it is unable to ping under the user defined constraints, this device will
automatically reboot.
Figure 5-16-3-1 Ping Watch Dog
This function is only available in Standard AP Mode.
The page includes the following fields:
Object Description
 Enable Turn on/off Ping Watch Dog.
 IP Address
The IP address of the target host where the Ping Watch Dog Utility
is sending ping packets.
 Interval
Time interval between two ping packets which are sent out
continuously.
 Delay
Time delay before first ping packet is sent out when the device is
restarted.
 Fail Count
Upper limit of the ping packet the device can drop continuously. If
this value is overrun, the device will restart automatically.
 Save Click the Save button to save the settings.