PLANET SGSW-24040 - Manual (Page 446)

User’s Manual of SGSW-24040 / 24240 Series
446
Security Network ARP Inspection Port Mode [] [enable|disable]
Parameters:
: Port list or 'all', default: All ports
enable : Enable ARP Inspection port
disable : Disable ARP Inspection port
(default: Show ARP Inspection port mode)
Default Setting:
Disable
Example:
Enable the ARP inspection mode of port 1
SWITCH/>security network arp inspection port mode 1
Security Network ARP Inspection Entry
Description:
Add or delete ARP inspection static entry.
Syntax:
Security Network ARP Inspection Entry [] add|delete
Parameters:
: Port list or 'all', default: All ports
add : Add new port ARP inspection static entry
delete : Delete existing port ARP inspection static entry
: VLAN ID (1-4095)
: MAC address (xx-xx-xx-xx-xx-xx), MAC address allowed for doing ARP request
: IP address (a.b.c.d), IP address allowed for doing ARP request
Default Setting:
300
Example:
Add ARP inspection static entry.
SWITCH/>security network arp inspection entry 1 add 1 00-30-4f-00-00-11 192.168.0.11