PLANET SGSW-24040 - Manual (Page 328)

User’s Manual of SGSW-24040 / 24240 Series
328
"Reelect" being set to "Yes" for one of the switches in the stack.
On the Stack State Monitor web page, this is shown by "Reelect" being set to "Yes" for one of the switches in the stack.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
4.17.3 Stack Information
This page provides an overview of the stack topology, as detected by SPROUT.
 Stack Topology
The Stack Topology screen in Figure 4-17-7 appears.
Figure 4-17-7 Stack Information page screenshot - Stack Topology
The page includes the following fields:
Object Description
•
Stack Topology Specifies the type of topology for the stack:
Chain: A chain of switches, that is, no redundant forwarding paths.
Ring: A ring of switches, thereby providing redundant forwarding paths.
Back-to-Back: Two switches interconnected on both stacking ports.
•
Stack Member Count The number of switches in the stack.
•
Last Topology Change The time of the last topology change in the stack.
•
Master Switch The MAC address of the current stack master switch.
•
Last Master Change The time of the last master change in the stack.