3 set up tos precedence mapping – PLANET SGSW-24040 User Manual
Page 185
User’s Manual of SGSW-24040 / 24240 Series
185
STEP-2
According to your selection on the previous page, this wizard will create specific QCEs (QoS Control Entries) automatically.
First select the QCL ID for these QCEs, and then select the traffic class. Different parameter options are displayed depending on
the frame type that you selected.
Figure 4-9-4 Set up Typical Network Application Rules page 2 screenshot
The page includes the following fields:
Object
Description
•
QCL ID
Select the QCL ID to which these QCEs apply.
•
Traffic Class
Select a traffic class of Low, Normal, Medium, or High to apply to the QCE.
Buttons
: Click to cancel the wizard.
: Click to go back to the previous wizard step.
: Click to continue the wizard.
4.9.2.3 Set up ToS Precedence Mapping
Set up the traffic class mapping to the precedence part of ToS (3 bits) when receiving IPv4/IPv6 packets. The Set up ToS
Precedence Mapping screen in
Figure 4-9-5
appears.