PLANET SGSW-24040 - Manual (Page 192)

User’s Manual of SGSW-24040 / 24240 Series
192
The page includes the following fields:
Object Description
• Number of Classes
Configure the number of traffic classes as "1", "2", or "4".
The default value is "4".
•
Port The logical port for the settings contained in the same row.
•
Default Class Configure the default QoS class for the port, that is, the QoS class for frames not
matching any of the QCEs in the QCL.
•
QCL # Select which QCL to use for the port.
•
Tag Priority Select the default tag priority for this port when adding a Tag to the untagged
frames.
•
Queuing Mode Select which Queuing mode for this port.
• Queue Weighted
Setting Queue weighted(Low:Normal:Medium:High) if the "Queuing Mode" is
"Weighted".
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
4.9.5 Bandwidth Control
Configure the switch port rate limit for Polices and Shapers on this page. The settings relate to the currently selected stack unit,
as reflected by the page header. The screen Bandwidth Control in Figure 4-9-10 appears.