PLANET SGSW-24040 User Manual
Page 335
User’s Manual of SGSW-24040 / 24240 Series
335
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please use the procedures as follow:
Show the current IP address
1.
On ”Switch/> ” prompt, enter “ip configuration”.
2.
The screen displays the current IP address, Subnet Mask and Gateway. As show in
Figure 5-2
.
Figure 5-2 Show IP information screen
Configure IP address
3.
On “Switch/> ” prompt, enter the following command and press
Figure 5-3
.
Switch/> ip setup 192.168.0.101 255.255.255.0 192.168.0.253 1
The previous command would apply the follow settings for the Switch.
IP: 192.168.0.101
Subnet Mask: 255.255.255.0
Gateway: 192.168.0.253
VLAN ID: 1