Security network nas authenticate – PLANET SGSW-24040 User Manual
Page 426

User’s Manual of SGSW-24040 / 24240 Series
426
Set or show either global enabledness and parameters (use the global keyword) or per-port enabledness of Guest VLAN
Unless the 'global' keyword is used, the
Syntax:
Security Network NAS Guest_VLAN [global|
Parameters:
global: Select the global Guest VLAN setting
(default: Show current per-port Guest VLAN enabledness)
enable|disable: enable : Enable Guest VLAN either globally or on one or more ports
disable: Disable Guest VLAN either globally or on one or more ports
(default: Show current Guest VLAN enabledness)
(default: Show current Guest VLAN ID)
of times a Request Identity EAPOL frame is sent without reasponse before considering entering the
Guest VLAN
(default: Show current Maximum Reauth Count value)
disable:The Guest VLAN can only be entered if no EAPOL frames have been received on a port for the lifetime of the port
enable :The Guest VLAN can be entered even if an EAPOL frame has been received during the lifetime of the port
(default: Show current setting)
Default Setting:
disable
Example:
Enable NAS guest VLAN
SWITCH/>security network nas guest_vlan enable
Security Network NAS Authenticate
Description:
Refresh (restart) 802.1X authentication process.
Syntax:
Security Network NAS Authenticate [