PLANET SGSW-24040 - Manual (Page 29)

User’s Manual of SGSW-24040 / 24240 Series
29
Share data Buffer 1392 kilobytes
Switch Processing Scheme Store-and-Forward
Flow Control
IEEE 802.3x Pause Frame for Full-Duplex
Back pressure for Half-Duplex
Jumbo Frame 10Kbytes
Reset Button
< 5 seconds: System reboot
> 10 seconds: Factory Default
Dimension (W x D x H) 440 x 200 x 44.5 mm, 1U high
Weight
SGSW-24040: 3.0kg
SGSW-24040R: 3.1kg
LED Power, Link/Act and speed per Gigabit port
Power Consumption Max. 30.2 watts / 102.98 BTU
Power Requirement – AC AC 100~240V, 50/60Hz AC 100~240V, 50/60Hz
Power Requirement – DC ---
-48V DC @ 0.6A
Range: -30 ~ -60V
Stacking Numbers 16
Stacking Bandwidth 10Gbps Full-Duplex
Stack ID Display 7-Segment LED Display (1~9, A~F,0)
ESD Protection 6KV DC
Layer 2 Function
Basic Management Interfaces Console, Telnet, Web Browser, SNMPv1, v2c and v3
Secure Management Interface SSH, SSL, SNMP v3
Port configuration
Port disable/enable.
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection.
Flow Control disable / enable.
Bandwidth control on each port.
Power saving mode control
Port Status
Display each port’s speed duplex mode, link status, Flow control status.
Auto negotiation status, trunk status.
VLAN
802.1Q Tagged Based VLAN ,up to 255 VLAN groups
Q-in-Q
Private VLAN
Voice VLAN
Port trunking
IEEE 802.3ad LACP / Static Trunk
Support 12 groups of 16-Port trunk support
QoS
Traffic classification based, Strict priority and WRR
4-level priority for switching