PLANET SGSW-24040 - Manual (Page 22)

User’s Manual of SGSW-24040 / 24240 Series
22
trend of higher power demand. Hence, the IEEE 802.3at Power over Ethernet pre-standard is defined to allow delivery of
maximum up to 30 Watts input power to per PoE device. The IEEE 802.3at Power over Ethernet pre-standard is an ideal
solution to fulfill the high power requirements directly via the RJ-45 Port interface. Compliant with IEEE 802.3at, the
SGSW-24040HP possesses stronger power capability than the existing 802.3af PoE Switch.
The below table lists the major hardware difference between the series model:
Model
(SGSW Series)
24240 24240R 24040 24040R 24040P 24040P4 24040HP
Interface
Copper 8 24
Fiber 24, 100FX compatible 4, 100FX compatible
Redundant Power -
-48V DC
(-30V~-60V)
-
-48V DC
(-30V~-60V)
-
PoE Mode - af af af / at
PoE Budget - 220W 380W 360W
Stack Capability Hardware stacking, up to 16 units
1.3 How to Use This Manual
This User Manual is structured as follows:
Section 2 , INSTALLATION
The section explains the functions of the Switch and how to physically install the Managed Switch.
Section 3 , SWITCH MANAGEMENT
The section contains the information about the software function of the Managed Switch.
Section 4 , WEB CONFIGURATION
The section explains how to manage the Managed Switch by Web interface.
Section 5 , COMMAND LINE INTERFACE
The section describes how to use the Command Line interface (CLI).
Section 6 , CLI CONFIGURATION
The section explains how to manage the Managed Switch by Command Line interface.
Section 7, SWITCH OPERATION
The chapter explains how to does the switch operation of the Managed Switch.
Section 8 , POWER OVER ETHERNET OVERVIEW
The chapter introduce the IEEE 802.3af PoE standard and PoE provision of the Managed Switch.
Section 9 , TROUBSHOOTING
The chapter explains how to trouble shooting of the Managed Switch.
Appendix A
The section contains cable information of the Managed Switch.