PLANET SGSW-24040 - Manual (Page 240)

User’s Manual of SGSW-24040 / 24240 Series
240
remain in the unauthenticated state for Hold Time seconds.
• Last Authentication
Shows the date and time of the last authentication of the client (successful as well as
unsuccessful).
Buttons
Auto-refresh : Check this box to enable an automatic refresh of the page at regular intervals.
: Click to refresh the page immediately.
: This button is available in the following modes:
• Force Authorized
• Force Unauthorized
• Port-based 802.1X
• Single 802.1X
Click to clear the counters for the selected port.
: This button is available in the following modes:
• Multi 802.1X
• MAC-based Auth.X
Click to clear both the port counters and all of the attached client's counters. The "Last Client" will not be cleared,
however.
: This button is available in the following modes:
• Multi 802.1X
• MAC-based Auth.X
Click to clear only the currently selected client's counters.
4.11.6 Authentication Server Configuration
This page allows you to configure the Authentication Servers. The Authentication Server Configuration screen in Figure 4-11-7
appears.