Security switch snmp mode – PLANET SGSW-24040 User Manual
Page 395
User’s Manual of SGSW-24040 / 24240 Series
395
Number of entries: 1
SNMPv3 Groups Table;
Idx Model Security Name Group Name
--- ----- -------------------------------- --------------------------------
1 v1 public default_ro_group
2 v1 private default_rw_group
3 v2c public default_ro_group
4 v2c private default_rw_group
5 usm default_user default_rw_group
Number of entries: 5
SNMPv3 Views Table:
Idx View Name View Type OID Subtree
--- -------------------------------- --------- --------------------------------
1 default_view included .1
Number of entries: 1
SNMPv3 Accesses Table:
Idx Group Name Model Level
--- -------------------------------- ----- --------------
1 default_ro_group any NoAuth, NoPriv
2 default_rw_group any NoAuth, NoPriv
Number of entries: 2
Security Switch SNMP Mode
Description:
Set or show the SNMP mode.
Syntax:
Security Switch SNMP Mode [enable|disable]
Parameters:
enable : Enable SNMP
disable: Disable SNMP
(default: Show SNMP mode)