PLANET SGS-5220-24T2X - Manual (Page 360)

Command Guide of SGS-5220-24T2X
MAC Address VID Interfaces
----------- --- ----------
00-40-55-00-00-00 1 GigabitEthernet 1/1
4.20.103 show vlan protocol
Command:
show vlan protocol [ eth2 { | arp | ip | ipx | at } ] [ snap { | rfc-1042 |
snap-8021h } ] [ llc ]
show Show running system information
vlan VLAN status
protocol Protocol-based VLAN status
eth2 Ethernet protocol based VLAN status
Ether Type(Range: 0x600 - 0xFFFF)
arp Ether Type is ARP
at Ether Type is AppleTalk
ip Ether Type is IP
ipx Ether Type is IPX
llc LLC-based VLAN status
DSAP (Range: 0x00 - 0xFF)
SSAP (Range: 0x00 - 0xFF)
snap SNAP-based VLAN status
SNAP OUI (Range 0x000000 - 0XFFFFFF)
rfc-1042 SNAP OUI is rfc-1042
snap-8021h SNAP OUI is 8021h
PID (Range: 0x0 - 0xFFFF)
Default:
N/A
Usage Guide:
To display the Protocol-based VLAN information.
Example:
To display the Protocol-based VLAN information.
Switch # show vlan protocol
Protocol Type Protocol (Value) Group ID
------------- ------------------------ --------
LLC_SNAP OUI-00:e0:2b; PID:0x1 q
-360-