PLANET SGS-5220-24T2X - Manual (Page 104)

Command Guide of SGS-5220-24T2X
N/A
Usage Guide:
To default the function for specific interface
Example:
To enable the function (network-clock synchronization ssm) for GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # no network-clock synchronization ssm
4.2.45.64 ping ip
Command:
ping ip size
ping The ping command allows you to test connectivity to a network host from the appliance
ip ip
IP address
size size
Default is 56 (excluding MAC, IP and ICMP headers)
Default:
N/A
Usage Guide:
To run Ping function for specific interface
Example:
To run Ping function (IP address: 10.10.10.10 with size 88 bytes) for GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # ping ip 10.10.10.10 size 88
4.2.45.65 port-security
Command:
port-security
port-security Enable/disable port security per interface.
-104-