PLANET SGS-5220-24T2X - Manual (Page 185)

Command Guide of SGS-5220-24T2X
To enable MLD Snooping.
Switch# configure terminal
Switch (config)# ipv6 mld snooping
4.2.78 ipv6 mld snooping vlan
Command:
ipv6 mld snooping vlan
ipv6 IPv6 configuration commands
mld Multicast Listener Discovery
snooping Snooping MLD
vlan MLD VLAN
VLAN identifier(s): VID
Default:
Disabled
Usage Guide:
To enable MLD Snooping for specific VLAN.
Example:
To enable MLD Snooping for VLAN 1.
Switch# configure terminal
Switch (config)# ipv6 mld snooping vlan 1
4.2.79 ipv6 mld ssm-range
Command:
ipv6 mld ssm-range
ipv6 IPv6 configuration commands
mld Multicast Listener Discovery
ssm-range IPv6 address range of Source Specific Multicast
Valid IPv6 multicast address
Prefix length ranges from 8 to 128
Default:
ff3e:: /96
Usage Guide:
-185-