PLANET SGS-5220-24T2X - Manual (Page 176)

Command Guide of SGS-5220-24T2X
Example:
To configure static route as below table.
Switch# configure terminal
Switch (config)# ip route 192.168.1.0 255.255.255.0 192.168.0.1
4.2.68 ip routing
Command:
ip routing
ip Internet Protocol
routing Enable routing for IPv4 and IPv6
Default:
None
Usage Guide:
To enable IP routing
Example:
To enable IP routing
Switch# configure terminal
Switch (config)# ip routing
4.2.69 ip source binding interface
Command:
ip source binding interface 10GigabitEthernet | GigabitEthernet
ip Internet Protocol
source source command
binding ip source binding
-176-