PLANET SGS-5220-24T2X - Manual (Page 117)

Command Guide of SGS-5220-24T2X
Usage Guide:
To configure Unknown Frames Storm Control Rate of QoS for specific interface
Example:
To configure Unknown Frames Storm Control Rate (999 fps) of QoS for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos storm unicast 999 fps
4.2.45.87 qos tag-remark
Command:
qos tag-remark pcp dei
qos Quality of Service
tag-remark Tag remarking configuration
pcp Specify default PCP
Specific PCP
dei Specify default DEI
Specific DEI
Default:
0
Usage Guide:
To enable Tag-remark default mode of QoS for specific interface
Example:
To enable Tag-remark default mode (PCP:1 , DEI:1) of QoS for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos tag-remark pcp 1 dei 1
4.2.45.88 qos tag-remark mapped
Command:
qos tag-remark mapped
qos Quality of Service
-117-