PLANET SGS-5220-24T2X - Manual (Page 134)

Command Guide of SGS-5220-24T2X
4.2.45.116 switchport vlan mapping
Command:
switchport vlan mapping
switchport Switching mode characteristics
vlan VLAN commands
mapping Maps an interface to a VLAN translation group.
Group id
Default:
None
Usage Guide:
To configure Group mapping Table for specific interface
Example:
To configure Group mapping (Group 25) for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # switchport vlan mapping 25
4.2.45.117 switchport vlan protocol group
Command:
switchport vlan protocol group vlan
switchport Switching mode characteristics
vlan VLAN commands
protocol Protocol-based VLAN commands
group Protocol-based VLAN group commands
Group Name (Range: 1 - 16 characters)
vlan vlan keyword
VLAN ID required for the group to VLAN mapping (Range: 1-4095)
Default:
None
Usage Guide:
To configure VLAN protocol group for specific interface
Example:
To configure VLAN protocol group as tabled below for GigabitEthernet X/X
-134-