PLANET SGS-5220-24T2X - Manual (Page 238)

Command Guide of SGS-5220-24T2X
snmp-server community { v2c [ ro | rw ] | v3 [
] }
snmp-server Set SNMP server's configurations
community Set the SNMP community
v2c SNMPv2c
Community word
ro Read only
rw Read write
v3 SNMPv3
Community word
IPv4 address
IPv4 netmask
Default:
None
Usage Guide:
To configure the Read / Write / Source network Community of SNMP
Example:
To configure the Read / Write / Source network Community (below table) of SNMP
Switch# configure terminal
Switch (config)# snmp-server community v3 public 192.168.0.15 255.255.255.0
4.2.151 snmp-server contact
Command:
snmp-server contact
snmp-server Set SNMP server's configurations
contact Set the SNMP server's contact string
contact string
Default:
None
Usage Guide:
-238-