PLANET SGS-5220-24T2X - Manual (Page 217)

Command Guide of SGS-5220-24T2X
4.2.123 ntp server
Command:
ntp server <1-5> ip-address { | | }
ntp Configure NTP
server Configure NTP server
<1-5> index number
domain name
ipv4 address
ipv6 address
Default:
None
Usage Guide:
To configure the IP addresses of NTP Server
Example:
To configure the IP address (9.9.9.9) of NTP Server for index 1
Switch# configure terminal
Switch (config)# ntp server 1 ip-address 9.9.9.9
4.2.124 port-security
Command:
port-security
port-security Enable/disable port security globally
Default:
Disabled
Usage Guide:
To enable the Port Security
Example:
To enable the Port Security
Switch# configure terminal
Switch (config)# port-security
-217-