PLANET SGS-5220-24T2X - Manual (Page 253)

Command Guide of SGS-5220-24T2X
4.2.156 tacacs-server deadtime
Command:
tacacs-server deadtime
tacacs-server Configure TACACS+
deadtime Time to stop using a TACACS+ server that doesn't respond
Time in minutes
Default:
0
Usage Guide:
To configure the Deadtime of TACACS+ Server
Example:
To enable the Deadtime (6) of TACACS+ Server
Switch# configure terminal
Switch (config)# tacacs-server deadtime 6
4.2.157 tacacs-server host
Command:
tacacs-server host [ port ] [ timeout ] [ key ]
tacacs-server Configure TACACS+
host Specify a TACACS+ server
Hostname or IP address
key Server specific key (overrides default)
port TCP port for TACACS+ server
TCP port number
timeout Time to wait for this TACACS+ server to reply (overrides default)
Wait time in seconds
The shared key
Default:
None
Usage Guide:
To configure the Host of TACACS+ Server
Example:
To enable the Host (below table) of TACACS+ Server
-253-