PLANET SGS-5220-24T2X - Manual (Page 231)

Command Guide of SGS-5220-24T2X
Switch# configure terminal
Switch (config)# radius-server attribute 95 2001::7788
4.2.140 radius-server deadtime
Command:
radius-server deadtime
radius-server Configure RADIUS
deadtime Time to stop using a RADIUS server that doesn't respond
Time in minutes
Default:
0
Usage Guide:
To configure the Deadtime of Radius-Server
Example:
To configure the Deadtime (15) of Radius-Server
Switch# configure terminal
Switch (config)# radius-server deadtime 15
4.2.141 radius-server host
Command:
radius-server host [ auth-port ] [ acct-port ]
[ timeout ] [ retransmit ] [ key ]
radius-server Configure RADIUS
host Specify a RADIUS server
Hostname or IP address
acct-port UDP port for RADIUS accounting server
UDP port number
auth-port UDP port for RADIUS authentication server
UDP port number
key Server specific key (overrides default)
The shared key
retransmit Specify the number of retries to active server (overrides default)
-231-