PLANET SGS-5220-24T2X - Manual (Page 197)

Command Guide of SGS-5220-24T2X
4
Usage Guide:
To configure frame transmission time of LLDP
Example:
To configure frame transmission time (6) of LLDP
Switch# configure terminal
Switch (config)# lldp med fast 6
4.2.87 lldp med location-tlv altitude
Command:
lldp med location-tlv altitude [floors ] | [meters ]
lldp LLDP configurations.
med Media Endpoint Discovery
location-tlv LLDP-MED Location Type Length Value parameter
altitude Altitude parameter
floors Specify the altitude in floor.
Altitude value.
meters Specify the altitude in meters.
Default:
0
Usage Guide:
To configure altitude of LLDP-MED
Example:
To configure altitude (Floors 5) of LLDP-MED
Switch# configure terminal
Switch (config)# lldp med location-tlv altitude floors 5
4.2.88 lldp med location-tlv elin-addr
Command:
lldp med location-tlv elin-addr
lldp LLDP configurations.
-197-