PLANET SGS-5220-24T2X - Manual (Page 123)

Command Guide of SGS-5220-24T2X
To enable edge port of CIST Normal Port Configuration for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # spanning-tree edge
4.2.45.98 spanning-tree link-type
Command:
spanning-tree link-type auto | point-to-point | shared
spanning-tree Spanning Tree protocol
link-type Port link-type
auto Auto detect
point-to-point Forced to point-to-point
shared Forced to Shared
Default:
Auto
Usage Guide:
To configure point to point mode of CIST Normal Port Configuration for specific interface
Example:
To enable point to point mode (shared) of CIST Normal Port Configuration for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # spanning-tree edge
4.2.45.99 spanning-tree mst cost
Command:
spanning-tree mst cost | auto
spanning-tree Spanning Tree protocol
mst STP bridge instance
instance 0-7 (CIST=0, MST2=1...)
cost STP Cost of this port
Cost range
-123-