PLANET SGS-5220-24T2X - Manual (Page 186)

Command Guide of SGS-5220-24T2X
To enable SSM Range of MLD.
Example:
To enable SSM Range (ff3e::7788/128) of MLD.
Switch# configure terminal
Switch (config)# ipv6 mld ssm-range ff3e::7788 128
4.2.80 ipv6 mld unknown-flooding
Command:
ipv6 mld unknown-flooding
ipv6 IPv6 configuration commands
mld Multicast Listener Discovery
unknown-flooding Flooding unregistered IPv6 multicast traffic
Default:
Enabled
Usage Guide:
To flood unregistered IPv6 multicast traffic.
Example:
To flood unregistered IPv6 multicast traffic.
Switch# configure terminal
Switch (config)# ipv6 mld unknown-flooding
4.2.81 ipv6 route
Command:
Ipv6 route > {, interface vlan
}
ipv6 IPv6 configuration commands
route Add IP route
> IPv6 prefix x:x::y/z
IPv6 unicast address (except link-local address) of next-hop
interface Select an interface to configure
vlan VLAN Interface
-186-