PLANET SGS-5220-24T2X - Manual (Page 111)

Command Guide of SGS-5220-24T2X
To configure DSCP ingress translation of QoS for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos dscp-translate
4.2.45.77 qos map cos-tag
Command:
qos map cos-tag cos dpl pcp dei
qos Quality of Service
map QoS Map/Table configuration
cos-tag Map for cos to tag configuration
cos Specify class of service
Specific class of service or range
dpl Specify drop precedence level
Specific drop precedence level or range
pcp Specify PCP (Priority Code Point)
Specific PCP
dei Specify DEI (Drop Eligible Indicator)
Specific DEI
Default:
Disabled
Usage Guide:
To configure (QoS class, DP level) to (PCP, DEI) Mapping of QoS for specific interface
Example:
To configure (QoS class, DP level) to (PCP, DEI) Mapping of QoS as below table for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos map cos-tag cos 1 dpl 1 pcp 6 dei 0
-111-