PLANET SGS-5220-24T2X - Manual (Page 140)

Command Guide of SGS-5220-24T2X
To configure IP address mode (DHCP) for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ip address dhcp
4.2.46.6 ip address dhcp fallback
Command:
ip address dhcp fallback
ip Interface Internet Protocol config commands
address Address configuraton
dhcp Enable DHCP
DHCP fallback address
DHCP fallback netmask
Default:
None
Usage Guide:
To configure DHCP fallback IP address for specific VLAN
Example:
To configure DHCP fallback IP address (192.168.1.10/24) for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ip address dhcp fallback 192.168.1.10 255.255.255.0
4.2.46.7 ip dhcp server
Command:
ip dhcp server
ip Interface Internet Protocol config commands
dhcp Configure DHCP server parameters
server Enable DHCP server per VLAN
Default:
-140-