10 liebert xd piping, 1 liebert xd field piping, Flexible piping kit – Emerson Liebert Xtreme Density User Manual

Page 16: Prefabricated headers, Liebert xd connection port kit, Figure 12 liebert xd connection port kit, Liebert xd piping, Table 1

System Description

1.10 Liebert XD Piping

Liebert XD Piping is prefabricated distribution piping that is installed in anticipation of a growing sys-

tem. Liebert XD cooling modules are added as required and are quickly made operational with flexible

connection piping with threaded couplings. This unique system allows the room cooling capacity to

increase to more than 30kW per rack with no additional disruptive piping installation. The flexible

connection piping also allows the cooling modules to be re-positioned without interruption in operation.

1.10.1 Liebert XD Field Piping

Flexible Piping Kit

Flex pipe kits are available in lengths of 4, 6, 8 and 10 feet (1.2, 1.8, 2.4 and 3 meters). Connection

style to the module end may be straight or 90 degrees with one-shot style couplings or removable cou-

plings. Connection to the prefabricated piping assembly is a threaded coupler. For information on

acquiring the correct kit for your installation refer to DPN000780_Rev1, available by calling

1-800-LIEBERT and from your local Emerson Network Power representative.

Prefabricated Headers

Field piping kits are available in several versions

• 10 ft. (3.05m) with five or 10 ports
• 8 ft. (2.44m) with two or four ports

Each version is available in two pipe sizes:

• Supply pipe: 1-1/8"; return pipe: 2-1/8"
• Supply pipe: 1-3/8"; return pipe: 2-5/8"

Each kit contains supply pipe(s) and return pipe(s). Each port has a threaded coupling at the end with

automatic shutoff when disconnected. Each port also has a ball valve for manual shutoff. For more

Liebert XD Connection Port Kit

The connection ports in the Liebert XD Field Piping Kits are available as Liebert XD Connection Port

Kit. Each port has a threaded coupling, with automatic shutoff when disconnected, at the end. Each

port also has a ball valve for manual shutoff. Each kit contains one supply and one return port. Two

kit sizes are available:

• Supply pipe: 1-1/8"; return pipe: 2-1/8"
• Supply pipe: 1-3/8"; return pipe: 2-5/8"

Figure 12 Liebert XD connection port kit

Table 1

Liebert XD field-installed port kits header connection size

Assembly P#

Supply Header

Diameter

Return Header

Diameter

183169G3

1-1/8"

2-1/8"

183169G4

1-3/8"

2-5/8"

Return valve shown

Supply valve appearance

is similar, but is smaller