KEPCO KLR Series User Manual User Manual
Page 55
KLR091313
3-15
• AUTO - AUTO IP status is displayed in the DC VOLTS display.
•
ON - The KLR obtains an IP address automatically. (Both DHCP and AUTO IP
set to ON.)
•
OFF - The KLR uses the IP, MASK, GATE and DNS addresses established by
the user using either the UTIL - LAN menus at the front panel or via SCPI com-
mands. (AUTOIP set to OFF.)
• MAC1 - Shows first pair of hex digits of the MAC address (e.g., for MAC address 01-23-
45-67-89-AB the DC VOLTS display shows 01- and the DC AMPERES display shows
23-). Cannot be changed by the user.
• MAC2 - Shows second of two hex digits of the MAC address (e.g., for MAC address 01-
23-45-67-89-AB the DC VOLTS display shows 45- and the DC AMPERES display
shows 67-). Cannot be changed by the user.
• MAC3 - Shows third pair of hex digits of the MAC address (e.g., for MAC address 01-23-
45-67-89-AB the DC VOLTS display shows 89- and the DC AMPERES display shows
AB). Cannot be changed by the user.
• IP1 - Shows first half of IP address (e.g., for IP address 192.168.000.200 the DC
VOLTS display shows 192._ and the DC AMPERES display shows 168._). To change
the address, press DC OUTPUT switch, then rotate VOLTAGE control to change 192._
or CURRENT control to change 168._, then press DC OUTPUT switch to save.
• IP2 - Shows second half of IP address (e.g., for IP address 192.168.000.200 the DC
VOLTS display shows _000. and the DC AMPERES display shows _200). To change
the address, press DC OUTPUT switch, then rotate VOLTAGE control to change _000.
or CURRENT control to change _200., then press DC OUTPUT switch to save.
• MSK1 - Shows first half of SUBNET MASK address (see IP1 described above). Default is
255.255.
• MSK2 - Shows second half of SUBNET MASK address (see IP2 described above).
Default is 0.0
• GTE1 - Shows first half of GATE address (see IP1 described above).
• GTE2 - Shows second half of GATE address (see IP2 described above).
• DNS1 - Shows first half of DNS address (see IP2 described above).
• DNS2 - Shows second half of DNS address (see IP2 described above).
• RTN - Return to LAN menu.