KEPCO KLR Series User Manual - Manual (Page 17)

KLR 091313
1-5
PHYSICAL CHARACTERISTICS
Dimensions English 1.735”H x 19"W x 17.5"D Depth excluding connectors and termi-
nal blocks (see Figure 1-2).
metric 44.45 x 482.6 x 443.7 mm
Weight English 15 lbs
metric 6.82kg
Dielectric strength Input - Chassis 2121V d-c
Output - Chassis 2121V d-c
(1250V d-c 20V and 40V models)
Input - Output 4242V d-c
(2500V d-c 20V and 40V models)
Source power connector IEC 320-C19 appliance inlet
Load connections 20V and 40V
models
Nickel plated copper busbar with inte-
gral threaded stud (1/4-20-1/2in.) Provision for safety covers.
75-300V models Shock-safe Euroblock, single conduc-
tor size: 20-10AWG (0,5 - 5,0 mm2)
Analog programming port. 15 pin D-sub
Digital programming ports primary Standard GPIB connector IEEE 488.2 (GPIB)
secondary 9 pin D-sub RS 232 (standard Models only)
secondary RJ 45 LAN (E-Series Models Only)
Feedback/Control Input 5 position low profile Euroblocks
PROGRAMMING CHARACTERISTICS - LOCAL
Local control rotary encoders Panel mounted.
Local control resolution Coarse ~100 LSB/step Depress control for Fine resolution
Fine 1 LSB/step
Setting range 0-100% of rating
Power up settings voltage defaults to zero See PAR. 3.2.10.3 for Last Settings
Recall function.
current defaults to min. value (See Table 1-2)
Protection Limits Overvoltage 20-120% of Emax Programmable; accessed via front
panel protect switch or SCPI command
over digital bus.
Overcurrent 72-120% of Imax
TABLE 1-3. KLR SPECIFICATIONS (Continued)
SPECIFICATION RATING/DESCRIPTION CONDITION/COMMENT