Sending e-mail, Sending e-mail -37 – TA Triumph-Adler 3555i User Manual
Page 93
2-37
Installing and Setting up the Machine > Embedded Web Server RX
Sending E-mail
By configuring the SMTP settings, you can send E-mail notifications on completed jobs.
To use this function, this machine must be connected to a mail server using the SMTP protocol.
In addition, check the following.
• The network environment used to connect this machine to the mail server
A full-time connection via a LAN is recommended.
• SMTP settings
Use Embedded Web Server RX to register the IP address or host name of the SMTP server.
• If limits have been set on the size of E-mail messages, it may not be possible to send very large E-mails.
The procedure for specifying the SMTP settings is explained below.
1
Display the screen.
1
Access Embedded Web Server RX by referring to
Accessing Embedded Web Server RX on
.
2
From the [
Function Settings
] menu, click [
].
1
2