TA Triumph-Adler 3555i - Manual (Page 473)

10-35
Troubleshooting > Troubleshooting
2102
2103 Failed to send via FTP. Check the network and SMB settings.
•
The network cable is connected.
• The hub is not operating properly.
• The server is not operating properly.
—
Check the following of the FTP server.
•
Is FTP available?
• The server is not operating properly.
—
Failed to send the e-mail.
Failed to send i-FAX. Check the network and SMB settings.
•
The network cable is connected.
• The hub is not operating properly.
• The server is not operating properly.
—
2201
2202
2203
2231 Failed to send the e-mail.
Failed to send via FTP.
Failed to send via SMB.
Failed to send i-FAX. Check the network and SMB settings.
•
The network cable is connected.
• The hub is not operating properly.
• The server is not operating properly.
—
2204 Failed to send the e-mail.
Failed to send i-FAX. Check the E-mail size limit of the SMTP settings on
the Embedded Web Server RX. —
3101 Failed to send the e-mail.
Failed to send i-FAX. Check the authentication methods of both the sender
and the recipient. —
Failed to send via FTP. Check the network and SMB settings.
•
The network cable is connected.
• The hub is not operating properly.
• The server is not operating properly.
—
3201 Failed to send the e-mail.
Failed to send i-FAX. Check the authentication methods of both the sender
and the recipient. —
0007
4201
4701
5101
5102
5103
5104
7101
7102
7103
720f — Turn the main power switch off and back on. If this
error occurs several times, make a note of the
displayed error code and contact your service
representative. —
9181 — The scanned original exceeds the acceptable number
of pages of 999. Send the excess pages separately. —
Error
Code
Message Corrective Actions
Reference
Page