Jk m – TA Triumph-Adler 3555i User Manual
Page 466
10-28
Troubleshooting > Troubleshooting
J
K
M
Message
Checkpoints
Corrective Actions
Reference
Page
Job Accounting
restriction exceeded.
*
*
When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
Is the acceptable printing count
restricted by Job Accounting
exceeded?
The printing count exceeded the
acceptable count restricted by Job
Accounting. Cannot print any more.
The job is canceled. Press [End].
—
Job separator tray is full
of paper.
Is the acceptable storage capacity
exceeded?
Remove the paper and press
[Continue]. Printing then resumes.
—
Is the paper curled?
Check the checkpoints of "Printouts
are curled." in Solving Malfunctions
and take the corrective actions.
Message
Checkpoints
Corrective Actions
Reference
Page
KPDL error.
*
*
When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
―
PostScript error has occurred. The
job is canceled. Press [End].
―
Message
Checkpoints
Corrective Actions
Reference
Page
Machine failure.
―
Internal error has occurred. Make a
note of the error code displayed on
the screen. Call service.
―
Mailbox tray is full of
paper.
Is the acceptable storage capacity
exceeded?
Remove the paper. Printing then
resumes.
—
Main unit inner tray is
full of paper.
Is the acceptable storage capacity
exceeded?
Remove the paper. Printing then
resumes.
—
Is the paper curled?
Check the checkpoints of "Printouts
are curled." in Solving Malfunctions
and take the corrective actions.
Main unit upper left tray
is full of paper.
Is the acceptable storage capacity
exceeded?
Remove the paper and press
[Continue]. Printing then resumes.
—
Maximum number of
scanned pages.
Is the acceptable scanning count
exceeded?
Cannot scan pages any more.
Follow the instructions on the
screen.
—
Memory is full.
*
*
When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
—
The memory is full and the job
cannot be continued. Press
[Continue] to print the scanned
pages. The print job cannot be
processed completely. Press
[Cancel] to cancel the job.
—
—
The process cannot be performed
due to insufficient memory. If only
[End] is available, press [End]. The
job will be canceled.
—