TA Triumph-Adler 3555i - Manual (Page 151)

3-49
Preparation before Use > Registering Destinations in the Address Book
2 Check if the destination entry is correct and press [Save]. The destination is added to the
Address Book.
To register the registered address in a one-touch key, press [Yes] in the pop-up screen that appears
after [Save] is pressed.
The Folder (FTP) Address
Press [Change] of "Host Name", "Path", "Login User Name" and "Login Password", enter the
information for each item and press [OK].
The table below explains the items to be entered.
* If you specify a port number other than the default (21), use the "Host name: port number"
(Example: FTPhostname:140).
To enter the IPv6 address, enclose the address in brackets [ ].
(Example: [3ae3:9a0:cd05:b1d2:28a:1fc0:a1:10ae]:140)
NOTE
To register a new One Touch Key, refer to Adding a Destination on One Touch Key (One
Touch Key) on page 3-53 .
Item Descriptions
Max. No. of
Characters
Host Name* Host name or IP address of FTP server Up to
64 characters
Path Path for the file to be stored
For example, "User\ScanData".
If no path is entered, the file is stored in the home
directory. Up to
128 characters
Login User Name FTP server login user name Up to
64 characters
Login Password FTP server login password Up to
64 characters
NOTE
• Refer to the Character Entry Method on page 11-10 for details on entering characters.
• Press [Connection Test] to check the connection to the FTP server you chose. If the
connection fails, check the entries you made.