Priority override, Repeat copy, Priority override -55 repeat copy -55 – TA Triumph-Adler 3555i User Manual
Page 303
6-55
Using Various Functions > Functions
Priority Override
Suspends the current job and gives a new job top priority. The suspended job resumes after the other job is finished.
(
Value
: [Off] / [On])
Repeat Copy
Enables additional copies in the desired quantity as necessary after a copy job is completed. For confidential
documents, you can set up a password for the use of Repeat Copy. In such a case, the correct password must be
entered to perform Repeat Copy.
To register a password, press [# Keys] and enter a 4-digit password.
Repeat Copy is not available when the machine is equipped with the optional Data Security Kit.
When the maximum number of Repeat Copy jobs to retain in the document box is set to 0 (zero), this function cannot be
used. (Refer to
Repeat Copy Job Retention on page 8-34
.)
You can select Repeat Copy as the default setting. For details, refer to
Giving a file name to a copy job will facilitate identification of the data when copying. (Refer to
.)
Repeat Copy
The Repeat Copy jobs are stored in the Job Box. Refer to
Outputting Repeat Copy Jobs on page 5-64
Repeat Copy jobs.
NOTE
This function is not available if current job was an override.
Priority override may not be available depending on the status of the current print job and memory usage. In this case,
try the interrupt copy.
IMPORTANT
• A Repeat Copy job is cleared when the main power switch is turned off.
• If you forget the password, Repeat Copy cannot be performed for that document. Make a note of the password
beforehand if necessary.
Copy
Advanced
Setup
Custom
Box
Functions
USB
Memory
Functions
Copy
Advanced
Setup