TA Triumph-Adler 3555i - Manual (Page 220)

5-46
Operation on the Machine > What is Document Box?
What is Document Box?
Document Box contains four types of component boxes which provide the following functions.
The following types of document boxes are available.
Custom Box (page 5-52)
Custom Box is a component box which you can create within the Document Box and store data for later retrieval. You
can create or delete a Custom Box, and manipulate data in various ways as described below:
Job Box
Job Box is a generic name for the "Private Print/Stored Job Box", "Quick Copy/Proof and Hold Box", "Repeat Copy Box",
and "Form for Form Overlay Box". These Job Boxes cannot be created or deleted by a user.
Private Print/Stored Job Box (page 4-14)
In Private Printing, you can specify that a job is not to be printed until you operate the machine. When sending the job
from the application software, specify a 4-digit access code in the printer driver. The job is released for printing by
entering the access code on the operation panel, ensuring confidentiality of the print job. The data will be deleted upon
completion of the print job or after the main power switch is turned off.
In Stored Job, the print data sent from the application is saved to the machine. You can set up an access code as
necessary. If you set up an access code, enter the access code when printing. Print data will be stored in the hard disk
after printing. This will allow printing of the same print data repeatedly.
Quick Copy/Proof and Hold Box (page 4-16)
Quick Copy feature facilitates additional prints of a document already printed. Activating Quick Copy and printing a
document using the printer driver allow the print data to be stored in the Quick Copy Job Box. When additional copies
are required, you can reprint the required number of copies from the operation panel. By default, up to 32 documents
can be stored. When power is turned off, all stored jobs will be deleted.
The Proof and Hold feature produces only a single proof print of multiple-print job and holds printing of the remaining
copies. Printing a multiple-print job in Proof and Hold using the printer driver allows only a single copy to be printed while
maintaining the document data in the Job Box. To continue to print the remaining copies, use the operation panel. You
can change the number of copies to print.
Creating a New Custom Box (Add/Edit Box) (page 5-52)
Storing Documents (Store File) (page 5-55)
Printing Documents (Print) (page 5-56)
Sending Documents (Send) (page 5-57)
Editing Documents (page 5-59)
Deleting Documents (page 5-63)
NOTE
You can set up the machine so that temporary documents in job boxes are automatically deleted. For details, refer to
Deletion of Job Retention on page 8-34 .
NOTE
When you attempt to store documents in excess of the above maximum, the oldest document data will be overwritten
by the latest document data.