TA Triumph-Adler 3555i - Manual (Page 360)

8-24
Setup and Registration (System Menu) > System Menu
Manual Staple
Offset Documents by Job
Offset One Page Documents
Common Settings
NOTE
Only displayed when the optional 4,000-sheet finisher is installed.
Item Description
Manual Staple Select whether to use Manual Staple.
Value : Off, On
NOTE
If you selected [On], set the time until manual stapling mode is automatically cancelled. The
setting range is 5 to 60 seconds (in 5-second increments).
Staple Position Set the default Staple Position.
Value : A4 Long Edge, Letter Long Edge
Common Settings
Item Description
Offset Documents by Job Select whether to offset documents by Job.
Value : Off, On
NOTE
This function is displayed when an optional 1,000-sheet finisher or 4,000-sheet finisher is
installed.
Common Settings
Item Description
Offset One Page Documents Set whether one-page documents are sorted.
Value : Off, On
NOTE
This function is displayed when an optional 1,000-sheet finisher or 4,000-sheet finisher is
installed.