TA Triumph-Adler 3555i User Manual
Page 459
10-21
Troubleshooting > Troubleshooting
Dirt on the top edge or back
of the paper.
Check the machine interior.
Open the right cover. If the machine
interior is dirty with toner, clean it using
soft, dry, lint-free cloth.
―
Part of the image is
periodically faint or shows
white lines.
―
Run [Drum Refresh 1].
―
Run [Developer Refresh].
Print on the back of the
sheet is visible on the front.
―
Set [Prevent Bleed-through] to [On].
White dots appear on the
image.
―
Run [Drum Refresh2].
Colors appear different than
you anticipated.
―
Run [Tone Curve Adjustment].
Perform Tone Curve
Adjustment in the System
Menu. is displayed.
Over long periods of use, the effects of
the ambient temperature and humidity
can cause output hues to vary slightly.
Run [Tone Curve Adjustment].
Cannot create Searchable
PDF file.
Is the proper language selected?
Check the language to extract.
Can the texts on the original not be
recognized as texts, or is the PDF
creation time taken?
Check the following:
•
The original orientation is correct.
•
When setting the originals with the
mixed orientation at once, [On] is
selected for [Auto Image Rotation].
Symptom
Checkpoints
Corrective Actions
Reference
Page