TA Triumph-Adler 3555i - Manual (Page 353)

8-17
Setup and Registration (System Menu) > System Menu
Function Defaults
If you want to enable the changed defaults immediately, move to the function screen and press the [ Reset ] key.
Common Settings
Item Description
Original Orientation Set the original orientation defaults.
Value : Top Edge on Top, Top Edge on Left
Original Image (Copy) Set the default original document type for copying.
Value : Text+Photo (Printer), Text+Photo (Magazine), Photo (Printer), Photo (Magazine),
Photo (Photo Paper), Text, Text (Fine Line), Graphic/Map (Printer), Graphic/Map
(Magazine)
Org. Image (Send/Store) Set the default original document type for sending/storing.
Value : Text + Photo, Photo, Text, Text (for OCR)
Scan Resolution Select the default scanning resolution.
Value : 600×600dpi, 400×400dpi Ultra Fine, 300×300dpi, 200×400dpi Super Fine,
200×200dpi Fine, 200×100dpi Normal
FAX TX Resolution * For details, refer to the FAX Operation Guide.
Color Selection Select the default color mode for scanning documents.
Value : Auto Color (Color/Gray), Auto Color (Color/B & W), Full Color, Grayscale,
Black & White
File Format Set the default type of the files.
Value : PDF, TIFF, JPEG, XPS, High Comp. PDF
File Separation Select the default file separation setting.
Value : Off, Each Page
Backgrnd Density (Copy) Set the default Backgrnd Density (Copy).
Value : Off, Auto, Manual (Darker 5)
BackgrndDens.(Send/Store) Set the default Backgrnd Density (Send/Store).
Value : Off, Auto, Manual (Darker 5)
Prevent Bleed-thru (Copy) Set the default value for preventing bleed-through (Copy).
Value : Off, On
Prevent Bleed(Send/Store) Set the default Prevent Bleed (Send/Store).
Value : Off, On
Zoom Select the enlarged/reduced default when paper size/sending size changed after the originals
set.
Value : 100%, Auto
Border Erase Default Set the default width to be erased as a border.
Value
Metric: 0 to 50 mm (in 1 mm increments)
Inch: 0 to 2" (in 0.01" increments)
NOTE
To specify border erase widths around original, set the value in "Border". To specify border
erase widths in the middle of original, set the value in "Gutter".
Border Erase to Back Page Select the Border Erase Method for Back Page of a sheet.
Value : Same as Front Page, Do Not Erase