TA Triumph-Adler 3060i - Manual (Page 465)

10-35
Troubleshooting > Troubleshooting
Clearing Paper Jams
If a paper jam occurs, the touch panel will display "Paper Jam." and the machine will stop. Refer to these procedures to
remove the jammed paper.
Jam Location Indicators
If a paper jam occurs, the location of the jam will be displayed on the touch panel as well as the clearing instructions.
After you remove the jam, the machine will warm up again and the error message will be cleared. The machine resumes
with the page that was printing when the jam occurred.
Paper Jam Location Indicator Paper Jam Location Reference Page
A Cassette 1 page 10-36
B Cassette 2 page 10-37
C Cassette 3 or 4 (Option) page 10-38
D Multi Purpose Tray page 10-40
E Duplex unit page 10-41
F Inner Tray / Fixing unit page 10-42
G Document processor (Option) page 10-43
H Job Separator page 10-46
I Bridge Unit (Option) page 10-46
J 1,000-Sheet Finisher (Option) page 10-47
3,000-Sheet Finisher (Option) page 10-48
K Mailbox (Option) page 10-51
JAM
Paper jam.
02/04
1. Open right cover 1
and remove the paper.
2. Open the fuser cover (a)
and remove the paper.
3. Remove any paper from
the paper ejection.
4. Close the cover.
Shows the location
of a paper jam.
Shows the removal procedure.
Shows the next step.
Shows the previous step.
A
D
G
H I
B
C
C
B
E
F
C
C
K
J
J
J
J
J
J
J
JAM
Paper jam.
02/04
1. Open right cover 1
and remove the paper.
2. Open the fuser cover (a)
and remove the paper.
3. Remove any paper from
the paper ejection.
4. Close the cover.