TA Triumph-Adler 3060i - Manual (Page 458)

10-28
Troubleshooting > Troubleshooting
U
W
The print system
connected to the current
port is not supported by
the printer driver.
Use a printer driver for
this port that matches
the print system. Is the printer driver for this product
used? Check the product name of the
machine and reinstall the printer
driver. —
The removable memory
is not formatted. Is the removable memory formatted
by this machine? Perform [Format] on this machine. ―
The slit glass requires
cleaning. — Clean the slit glass using the
cleaning cloth supplied with the
document processor. page 10-3
This user account is
locked out. — Contact administrator.
The job is canceled. Press [End]. ―
Toner is empty. — Replace the toner container to our
specified toner container. page 10-6
Toner is low. (Replace
when empty.) — It is almost time to replace the toner
container. Obtain a new toner
container. —
Tray # is full of paper. Is the acceptable storage capacity
exceeded? Remove the paper. Printing then
resumes. —
Message Checkpoints Corrective Actions
Reference
Page
Unknown toner installed. Is the installed toner container our
own brand?
We will not be liable for any damage
caused by the use of third party
supplies in this machine. —
Unknown Toner
Installed. PC Does the installed toner container's
regional specification match the
machine's? Install the specified container. —
Message Checkpoints Corrective Actions
Reference
Page
Warning for high
temperature. Adjust the
room temperature. ― Print quality may be deteriorated.
Adjust the temperature and the
humidity of your room. ―
Warning for low
temperature. Adjust the
room temperature. — Print quality may be deteriorated.
Adjust the temperature and the
humidity of your room. —
Warning low memory. — Cannot start the job. Try again later. —
Message Checkpoints Corrective Actions
Reference
Page