TA Triumph-Adler 3060i User Manual
Page 456
10-26
Troubleshooting > Troubleshooting
R
Message
Checkpoints
Corrective Actions
Reference
Page
Regulating the
temperature…
―
The machine is under the
adjustment to maintain its quality.
Please wait.
―
Removable memory
error.
*
*
When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
Is writing to a removable memory
prohibited?
An error occurred in the removable
memory. The job stopped. Press
[End].
The possible error codes and their
descriptions are as follows.
01: Connect a removable memory
that can be written to.
―
―
An error occurred in the removable
memory. The job stopped. Press
[End].
The possible error codes and their
descriptions are as follows.
01: The amount of data that can be
saved at once has been exceeded.
Restart the system or turn the
power OFF/ON. If the error still
occurs, divide the file into smaller
files.
If the error still occurs, the
removable memory is not
compatible with the machine. Use
the removable memory formatted
by this machine.
If the removable memory cannot be
formatted, it is damaged. Connect a
compatible removable memory.
Removable Memory is
full.
*
―
The job is canceled. Press [End].
Insufficient free space in the
removable memory. Delete
unneeded files.
―
Remove originals in the
document processor.
Are there any originals left in the
document processor?
Remove originals from the
document processor.
―
Replace all originals and
press [Continue].
—
Remove originals from the
document processor, put them back
in their original order, and place
them again. Press [Continue] to
resume printing. Press [Cancel] to
cancel the job.
—