TA Triumph-Adler 3060i User Manual
Page 386
8-58
System Menu > Default Setting on the Machine (System Menu)
Item
Description
Auto Color Correction
This setting allows you to adjust the detection level used by the machine to determine whether
the original is color or black and white in Auto Color Selection Mode. Setting a lower value will
result in more originals being identified as color, while a larger value will tend to increase the
number of originals being identified as black and white.
Value
: 1 (Color), 2, 3, 4, 5 (B & W)
Tone Curve Adjustment
After prolonged use, or from the effects of surrounding temperature or humidity, the printed
output tone may differ from the original. Perform this function to ensure consistency with the
original tone.
For the procedure, refer to
Tone Curve Adjustment on page 10-33
.
Drum Refresh
Remove image blur and white dots from the printout. It takes about 2 minutes and 30 seconds.
The time required may vary depending on the operating environment.
For more information, refer to the
NOTE
Drum Refresh cannot be performed while printing. Execute Drum Refresh after the printing is
done.