TA Triumph-Adler 2500ci User Manual
Page 460
10-24
Troubleshooting > Troubleshooting
P
R
Maximum number of
scanned pages.
Is the acceptable scanning count
exceeded?
Cannot scan pages any more.
Follow the instructions on the
screen.
—
Memory is full.
*
—
The memory is full and the job
cannot be continued. Press
[Continue] to print the scanned
pages. The print job cannot be
processed completely. Press
[Cancel] to cancel the job.
—
—
The process cannot be performed
due to insufficient memory. If only
[End] is available, press [End]. The
job will be canceled.
—
*
When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
Message
Checkpoints
Corrective Actions
Reference
Page
Paper jam.
―
If a paper jam occurs, the machine
will stop and the location of the jam
will be indicated on the screen.
Leave the machine on and follow
the instructions to remove the
jammed paper.
Paper left.
—
Remove paper from the document
finisher.
—
Performing Drum
Refresh…
—
The machine is under the
adjustment to maintain its quality.
Please wait.
—
Perform Tone Curve
Adjustment in the
System Menu.
Over long periods of use, the effects
of the ambient temperature and
humidity can cause output hues to
vary slightly.
Run [Tone Curve Adjustment].
Preparing to print.
—
The machine is under the
adjustment to maintain its quality.
Please wait.
—
Message
Checkpoints
Corrective Actions
Reference
Page
Regulating the
temperature…
―
The machine is under the
adjustment to maintain its quality.
Please wait.
―
Removable memory
error.
*
Is writing to a removable memory
prohibited?
An error occurred in the removable
memory. The job stopped. Press
[End].
The possible error codes and their
descriptions are as follows.
01: Connect a removable memory
that can be written to.
―
Message
Checkpoints
Corrective Actions
Reference
Page