TA Triumph-Adler 2500ci - Manual (Page 381)

8-45
System Menu > Default Setting on the Machine (System Menu)
Security Settings
LAN Interface
Restart Network
HTTP Select whether to communicate using HTTP. *1
Value : Off, On
HTTPS Select whether to communicate using HTTPS. *1, *2
Value : Off, On
LDAP Select whether to use LDAP.
Value : Off, On
SNMPv1/v2c Select whether to communicate using SNMP. *1
Value : Off, On
SNMPv3 Select whether to communicate using SNMPv3. *1
Value : Off, On
Enhanced WSD Select whether to use Enhanced WSD. *1
Value : Off, On
Enhanced WSD over SSL Select whether to use Enhanced WSD (SSL). *1, *2
Value : Off, On
NOTE
Selecting [Off] will disable the functionality of WIA, TWAIN and Network FAX drivers.
*1 The setting will be changed after restarting the device or network.
*2 Set "SSL" to [On] in Security Settings on page 8-45 .
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Item Description
SSL Select whether to use SSL for communication.
Value : Off, On
Item Description
LAN Interface Specify the settings for the LAN interface to be used.
Value : Auto, 10BASE-T Half, 10BASE-T Full, 100BASE-T Half, 100BASE-TX Full, 1000BASE-T
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Item Description
Restart Network Restarts the network.
Item Description