RIGOL DSA875 - Manual (Page 60)

RIGOL Chapter 11 To Generate a Test Report
11-2 User’s Guide for EMI Test System
3. Configure the parameters of the test instrument (Test
Instrumentation)
The test instrument currently detected is displayed by default (the instrument
is connect to the PC installed with EMI Test System via the communication
interface). In addition, you can input the other parameters of the test
instrument required by the current test manually and add them into the test
instrument list.
4. Edit the test instrument list
After editing a group of test instrument parameters,
 Click Add to add the test instrument parameters currently edited into the
test instrument list (multiple groups of test instrument data can be
added);
 Select a row of data in the test instrument list and click Delete to delete
this group of test instrument data;
 Click Clear to clear all the data in the test instrument list.
5. Add other explanation (Other Explanation)
You can click the text box under Other Explanation to define other
information in the test report.
6. Select the background color of the trace display (Background)
Click the Background box and select White or Black in the dropdown list to
set the background color of the trace display (Traces Display) in the test
report to be saved to "White" or "Black".
7. Save the report
After configuring all the report parameters, you can click OK to save the
current test report in *.html format.
The report includes the Measurement Time, Measurement
Environment, Device Under Test, Test Instrumentation, Instrument
Setting, Previous Detector, Final Detector, Final RBW, Final Meas
Time, Limit Data, Traces Display, Peaks List and Other Explanation.
8. Cancel the report generation
You can click Cancel to cancel the current report generation operation and
exit the test report configuration interface.