RIGOL DSA875 - Manual (Page 54)

RIGOL Chapter 9 To Perform Peak Search
9-4 User’s Guide for EMI Test System
At this point, you can click the text box in the figure above to define the
comment information.
4. Save the data list
Click Save to save the peak data edited in csv format.
5. Load a data list
Click Load to load a stored peak search data csv file.
To Operate the Peak Search List
The Peak search list is displayed at the bottom of the main interface of the
software (Figure 3-1). You can perform the following operations on the list.
1. Filter the test results
Click the dropdown arrow in the Filter box and select Pass, Fail or
Pass/Fail in the dropdown list to filter out the passed items or failed items in
the test results or display all the test results.
2. Mark peak display
Double-click a row of peak data in the peak search list to mark the
corresponding point on the scan curve in the spectrum window. The peak
number will also be displayed.