RIGOL DSA875 - Manual (Page 59)

Chapter 11 To Generate a Test Report RIGOL
User’s Guide for EMI Test System 11-1
Chapter 11 To Generate a Test Report
Click Report in the main interface of the software (Figure 3-1) to open the
Report Configuration dialog box as shown in the figure below.
Figure 11-1 Test Report Configuration Interface
You can perform the following operations in the figure above according to the
actual test situations.
1. Set the measurement environment parameters (Measurement
Environment)
The measurement environment parameters include Temperature(℃),
Humidity(RH), Testing Place, Testing Distance(m) and Polarization
Direction.
You can click the corresponding setting box of the parameter and input the
desired value.
2. Set the parameters of the device under test (Device Under Test)
You can click the parameter setting boxes and input the Name, Model
Number, Serial Number and Manufacturer of the current device under
test manually.
Measurement environment
Report background color
Save the report
Cancel the report generation
Test instrument
list
Test instrument
parameters
Parameters of the
device under test
Add other
explanation