RIGOL DSA875 - Manual (Page 47)

Chapter 7 To Edit the Limit Line RIGOL
User’s Guide for EMI Test System 7-3
To Operate the Limit Line List
1. Add data points
After editing the parameters (frequency and amplitude) of each data point
manually in Figure 7-1.
 Click Add to add a group of limit line data into the limit line list (they are
added into the last row by default);
 Click Insert Before to insert a group of limit line data in the row in front
of the data row currently selected;
 Click Insert After to insert a group of limit line data in the row behind
the data row currently selected.
2. Delete data points
Select a row of data in the limit line list and click Delete to delete the limit line
data in the specified row. Clear to delete all the data in the limit line list.
3. Save the data list
Click Save to save the limit line data edited in csv format.
4. Load a data list
Click Load to load a stored limit line data csv file.
Tip:
You can add the comment information manually after editing the limit line list.