RIGOL DSA875 - Manual (Page 27)

Chapter 2 Trial and Activation RIGOL
User’s Guide for EMI Test System 2-3
Activation
1. Enter the activate interface:
Click "Activate" in the popup prompt message box (Figure 2-1, Figure 2-2,
Figure 2-3) each time the software starts to enter the activate interface as
shown in Figure 2-4.
Figure 2-4 Software Activation Interface
2. Input the registration code:
Input the correct registration code in the activate interface and click OK to
activate the software functions. After that, the software runs directly when it
is started and no prompt message will be displayed.
3. Input the registration code (not match with the instrument):
When the registration code input is incorrect (not match with the instrument),
the prompt message as shown in Figure 2-5 will be displayed. Click OK; input
the correct registration code or close the activate interface.
Figure 2-5 Incorrect Registration Code Prompt Message
Note: The registration code is related to the serial number of the instrument.